NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Detected increasing uncorrectable error count:
I have two RN104 devices, both with 4 drives of 3TB Seagate Barracudas. Both 6.4.1 (now 6.4.2) A week ago I got a error similar to this on Unit 1 -- DISK 4 Today I saw this error on Unit ...
These particular errors are detected by the drive itself, and I don't see any way that the NAS firmware can create them, no matter what ATA commands it issues.
FWIW, based on postings here and other forums, I would not use a DM drive in a NAS. If you like Seagate drives you should instead use VN drives. The equivalent WD disk is the WD30EFRX (which is what I prefer).
DM drives are known to be trouble-prone (for instance https://www.backblaze.com/blog/3tb-hard-drive-failure/ )
Hi MWilliams4,
Drive failures can happen anytime and to be sure if the drive is faulty and needs to be replaced, kindly check this page for instructions.
Kind regards,
BrianL
NETGEAR Community Team
These particular errors are detected by the drive itself, and I don't see any way that the NAS firmware can create them, no matter what ATA commands it issues.
FWIW, based on postings here and other forums, I would not use a DM drive in a NAS. If you like Seagate drives you should instead use VN drives. The equivalent WD disk is the WD30EFRX (which is what I prefer).
DM drives are known to be trouble-prone (for instance https://www.backblaze.com/blog/3tb-hard-drive-failure/ )
Swapped out two more drives, one on each, and both within a week are giving the same errors.
Something is wrong...and from reading the article, I guess it's my seagate 3TB's UGH
Hi MWilliams,
You may want to run a (manufacturers) diagnostic test tool on each drive to see if they're really problematic or has some has errors in them.
Kind regards,
BrianL
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
