NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Easy fix fan/temp OS6 issues on x86 legacy #no support
>> EDIT - 2014-04-12 << Before to hack your system, update first to 6.1.7. Built-in fancontrol support is there! 6.1.7 has been released: http://www.readynas.com/forum/viewtopic.php?f=1&t=76000 ...
OS 6 reads fan1 speed, but unfortunately it's pwm3 file which control fan on ultra 6 system....
Since 6.1.1, on ultra 6, OS 6 reports 0 rpm as fan speed and send an alert mail every 10 minutes about fan error ....
Add a sensors.d config file to compute 0+800 rpm on fan1, and OS 6 reports 800 rpm on GUI . It's not really good, but fan error disapears !
Add this file rndu6000.conf in /etc/sensors.d and reboot your nas :
Another thing: OS6 reads /sys/devices/platform/it87.2576/temp2_input as sys temp.... unfortunately, on ultra 6 sys temp is temp1
**** EDIT **** better solution to solve this problem and activate reports and history on frontview : viewtopic.php?f=51&t=71155&start=60#p411650
Since 6.1.1, on ultra 6, OS 6 reports 0 rpm as fan speed and send an alert mail every 10 minutes about fan error ....
Add a sensors.d config file to compute 0+800 rpm on fan1, and OS 6 reports 800 rpm on GUI . It's not really good, but fan error disapears !
Add this file rndu6000.conf in /etc/sensors.d and reboot your nas :
chip "it8721-isa-0a10"
compute fan1 @+800,@-800
Another thing: OS6 reads /sys/devices/platform/it87.2576/temp2_input as sys temp.... unfortunately, on ultra 6 sys temp is temp1
**** EDIT **** better solution to solve this problem and activate reports and history on frontview : viewtopic.php?f=51&t=71155&start=60#p411650
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
