Easy fix fan/temp OS6 issues on x86 legacy #no support

undo temp hacks in 6.1.6:

apt-get remove lm-sensors fancontrol

Installed 6.1.7 and now getting this readings:



Temp graph is also showing now.


I've installed and done this through a remote connection from my work.
So I can't really tell at this moment if the fans are running fine or full RPM without the fix.

Trying to fix the fan RPM reading this evening.

Runing:
Q6600 @ Readynos Pro 6



Edit:

Installed the "temp-fix" again.
No result in showing correct rpm graphs.

CPU temp in browser = Core0
System temp in browser = Temp1

Sensors output:

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +40.0°C  (high = +84.0°C, crit = +100.0°C)
Core 1:       +42.0°C  (high = +84.0°C, crit = +100.0°C)
Core 2:       +38.0°C  (high = +84.0°C, crit = +100.0°C)
Core 3:       +38.0°C  (high = +84.0°C, crit = +100.0°C)

w83627dhg-isa-0a10
Adapter: ISA adapter
Vcore:        +1.14 V  (min =  +0.00 V, max =  +1.74 V)
in1:          +1.87 V  (min =  +0.54 V, max =  +0.89 V)  ALARM
AVCC:         +3.22 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:        +3.22 V  (min =  +2.98 V, max =  +3.63 V)
in4:          +1.23 V  (min =  +1.14 V, max =  +0.64 V)  ALARM
in5:          +1.49 V  (min =  +1.12 V, max =  +1.18 V)  ALARM
in6:          +1.02 V  (min =  +1.70 V, max =  +1.66 V)  ALARM
3VSB:         +3.20 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:         +3.14 V  (min =  +2.70 V, max =  +3.63 V)
Rear-fan:     897 RPM  (min = 84375 RPM, div = 16)  ALARM
CPU-fan:     1520 RPM  (min = 1467 RPM, div = 8)
Outside-fan: 1095 RPM  (min =  733 RPM, div = 8)
fan4:           0 RPM  (min = 2109 RPM, div = 128)  ALARM
fan5:           0 RPM  (min = 10546 RPM, div = 128)  ALARM
temp1:        +56.0°C  (high =  -1.0°C, hyst = +125.0°C)  sensor = thermistor
temp2:        +30.5°C  (high = +80.0°C, hyst = +123.0°C)  sensor = CPU diode
temp3:        -38.0°C  (high = +80.0°C, hyst = +123.0°C)  sensor = thermistor
cpu0_vid:    +0.000 V