NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Enable SMB 2 on ReadyNas x86 v4.2.31
Is it possible to enable SMB 2 on legacy ReadyNas devices running SAMBA 3.6?
If your Windows version gives you a free NFS client, you could also potentially switch to that: https://community.netgear.com/t5/Using-your-ReadyNAS/No-access-to-shares-after-disabling-SMB1-as-recommended-by/m-p/1288675/highlight/true#M130371 Then disable SMB altogether.
You could also try adding the following lines to the [global] section of the /etc/samba/smb.conf file and rebooting the NAS:
min protocol = SMB2
max protocol = SMB2
SMB2 support is only "experimental" in your version of SAMBA, so you might run into issues.
OR, convert your ultra to run OS 6, and that will give you SMB3 support.
So I have two options:
Go against Microsoft's advice and enable SMB1 on my PC
OR
Go against Netgear's advice and enable SMB2 on my NAS
Which option would you recommend?
If I want to take my chance with SMB2 on my NAS (as I'm just using it as a backup duplication repository), how I do I enable it via SSH?
Thanks.
If your Windows version gives you a free NFS client, you could also potentially switch to that: https://community.netgear.com/t5/Using-your-ReadyNAS/No-access-to-shares-after-disabling-SMB1-as-recommended-by/m-p/1288675/highlight/true#M130371 Then disable SMB altogether.
You could also try adding the following lines to the [global] section of the /etc/samba/smb.conf file and rebooting the NAS:
min protocol = SMB2
max protocol = SMB2
SMB2 support is only "experimental" in your version of SAMBA, so you might run into issues.
OR, convert your ultra to run OS 6, and that will give you SMB3 support.
Is there a guide on how I would convert to OS 6 from RAIDiator 4.2.31?
This THREAD covers it and applies to not just an Ultra 6, but read it all and not just the solution, there is information about checking/upgrading Bios which should be done in OS 4
Thanks. I've already upgraded to OS6. Completely missed the BIOS step, hopefully it doesn't cause any lsting issues.
Do you know if you can still update the BIOS from OS6?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
