NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Enabling SSH access on Readynas Ultra 2
Hi,
I've got two old Readynas ultra 2's which I am replacing with 2 new Synology DS224's mainly due to age and the declining support. In order to migrate the data I want to run some Rsynch routines via SSH but I can't seem to find out how to enable SSH access on the Net admin page. Various sites say go into the services page but enabling SSH is not available in any of the tabs. I
I'm obviously missing something.
please help
btw I wanted to "PULL" the data from the Readynas but it seems the Synology DSM224s don't allow you to do that. I've tried pushing an Rsynch job to the synology but just can't get it to connect despite Rsynch working between the two Netgears for years.
Note I instructed you to log in as root with the NAS admin password.
13 Replies
Replies have been turned off for this discussion
beaumonr wrote:
I've got two old Readynas ultra 2's
Are you running 4.2.x firmware? Or did you convert the systems to OS 6?
If you are running 4.2.x, then you need to install this add-on:
Then log into the NAS as root, using the NAS admin password. If you are using the default password - netgear1 - you will need to change it.
beaumonr wrote:
I've tried pushing an Rsync job to the synology but just can't get it to connect despite Rsync working between the two Netgears for years.
This sounds like it could be a missing setting on the synology. Though it could possibly be a wrong destination path in the ReadyNAS backup job.
Do make sure you've set rsync access to read/write and that the Synology is included in the allowed hosts, if you've used that option.
Hi,
I've checked the Rsynch config on the Synology, edited the Rsynch account and then checked the share destination settings so that the Rsynch account has full read write access to it. I can't see any other settings or permissions here.
When I create the back up job on the Readynas, using the Synology share above as the destination and specifying the server by IP address and the Rsynch account and password, I can't get the "test connection" to work says it always fails.
not getting any other useful information. both on the same network, can see each other. I'm at a loss for next step
thanks
Rob
ok, downloaded the add as instructed, installed it restarted the readynas, checked the logs which tell me that SSH root access has been enabled with the same password as my admin account.
From the same pc which I've logged into the management page I then try an SSH connection. It initially warns me about the lack of keys and gives option to continue, it then permanently adds the IP address to the list of known hosts.
I try and login it requests the password I enter it then it appears to open the connection I can see the name of the server and the ip address of the pc I,m trying to access it from. but then it closes the connection.
heres the screenshot.
I've not idea why and further help appreciated
thanks
Note I instructed you to log in as root with the NAS admin password.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
.jpg){kind=link}