NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Erreur can_overcommit
Hi everybody, My ReadyNAS 104 version 6.9.2 didn't respond. I rebooted it. One hour after Boot process, only one message displays : can_overcommit+20 I don't have SSH or Web access, only ...
One option is to use paid support (my.netgear.com).
Can you boot the NAS in read-only mode using the boot menu? See pages 28-29 here: http://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_%20OS6_Desktop_HM_EN.pdf
One option is to use paid support (my.netgear.com).
Can you boot the NAS in read-only mode using the boot menu? See pages 28-29 here: http://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_%20OS6_Desktop_HM_EN.pdf
Thanks for your fast answer.
I will test your solution.
I booted in "Read only" mode.
The NAS displays "Resync 33,34 %".
I can access Web interface.
Good. You should confirm that you have access to your data.
Wait for the resync to complete. While that's going on:
- Most importantly, you should be backing up the data on your NAS before you reboot. If you need USB drives to do that, then purchase them right away. Back up the most critical data before then (as much as you can).
- click on the volume setting wheel and see if quotas are enabled. If they are, disable them.
- It would also be good to disable services that you don't need or can live without. For instance, the antivirus service.
The remaining time is 70 hours !
May I update firmware to 6.9.3 to avoid any problem ?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
