NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Having trouble accessing boot menu on ReadyNas Duo V2
Hi all,
I have just been gifted a ReadyNAS RND2000 v2 by a friend who has upgraded. He kept his disks; I have installed a new WD disk from the Compatibility List with the idea of installing a s...
Since you started over with a new drive, you need to enter the default password, not the one your friend used. His is stored on the drives he removed.
If you really have a DuoV2 (due to a poor decision on Netgear's part regarding labeling, it can be confusing), then it will say "V2" on the front and the part number will end in -200xxx (where xxx is NAS or some other country code). In that case, the default password is password.
If you actually have a V1 (with a label on the bottom that says V2), which will have a part number ending in -100xxx, the default password is netgear1.
Since you started over with a new drive, you need to enter the default password, not the one your friend used. His is stored on the drives he removed.
If you really have a DuoV2 (due to a poor decision on Netgear's part regarding labeling, it can be confusing), then it will say "V2" on the front and the part number will end in -200xxx (where xxx is NAS or some other country code). In that case, the default password is password.
If you actually have a V1 (with a label on the bottom that says V2), which will have a part number ending in -100xxx, the default password is netgear1.
Thank you! That worked. :)
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
