NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
How to get access to old files on old NAS using windows
Hi, My network hard drive have been turned off for the last 4 years and I have changed house. The PC where I used to access the files is dead. Connecting the network harddrive to the new network...
Raidar 4.3.8 solved it for me, was able to browse unto the shares and copy the files away. Thanks for the help.
If you installed RAIDar 6.3, you probably need RAIDar 4.3.8 for your older NAS. But if you are able to get to the GUI, I don't know why you need RAIDar, which is mostly just a discovery tool and you must already know the IP address to get to the GUI. I do not understand your statement that "I can see that the files on the drive are still there but no shares are visible in the front view." If there are no shares, where do you see the files?
Does the NAS show up in "Network" as a PC? If so, double-click it and you should be presented a list of shares. If it doesn't show up, open any Windows Explorer (not Internet Explorer) window and type //ip-of-NAS/ into the address bar where ip-of-nas is the IP address shown when you access it via Frontview.
If you need more help, we'll need to know if your Duo is a V1 (part number ending in -100NAS) or V2 (ends in -200NAS). Do not be confused by a sticker that says "V2", Netgear has caused a lot of confusion by re-using the "V2" nomenclature.
Hi,
The model is ReadyNAS DUO 2120 v2 (on the sticker) (there is no 100NAS or 200NAS, serial nr is 24M3097B0002D).
When I enter the serial number in the normal explorer it opens internet explorer and goes to my shares (after I have enter username and password). It then shows "No shares currently accessible".
If I go to the frontview (in the web client). I can see that 17% of the disk space is used, so my stuff is still there.
In the normal explorer the readynas is shown as a storage device.
Best regards
Hi,
"When I enter the serial number in the normal explorer it opens internet explorer and goes to my shares (after I have enter username and password). It then shows "No shares currently accessible"."
Is of cause when I enter the IP adress of the REadyNas
My bad, I put the slashes in the wrong direction. Try \\ip-of-nas\.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
