NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
iSCSI not reconnecting - OS 6.6.1
I'm having a similar issue to both of these users who seemed to never get a resolution: https://community.netgear.com/t5/ReadyNAS-in-Business/iSCSi-won-t-reconnect/td-p/971430 https://community.net...
Well I found out the hard way tonight that this issue was absolutely not fixed in 6.7.0 (or 6.7.4 for that matter).
We had to restart our core switch over a configuration change, and as soon as we did all of our iSCSI devices started failing to log into the LUNs on the NAS... The same 'fix' as before worked, I went into the group for the LUNs and switched the Initiators option from 'Selected' to 'All', then back to 'Selected' and bam, all of the iSCSI devices re-connected immediately.
These devices simply cannot be used for iSCSI in this state... is there an actual fix planned soon??
Please send in a fresh set of logs (see the Sending Logs link in my sig).
Thanks for the reply, I just sent an email with logs from the unit.
The fix that went into 6.7.0 wasn't a complete fix. It only resolved the case where there was only a single static IP address. If you had multiple interfaces with different static IPs, only the first IP address would get reactivated for iSCSI. A complete fix will come in 6.7.5 Beta 2.
That would make sense then, I am using static IPs on two of the interfaces on different subnets for MPIO. Thanks for the heads up! I wish I could use the DHCP work-around but our VLANs are completed isolated between the NAS and hosts so there is no way to assign an address unfortunately.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
