NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
issue creating ReadyNAS 314 USB recovery tools (firmware ReadyNASOS-6.7.5-x86_64.img
Model:ReadyNAS 314
Firmware: 6.5.1
I tried all day to upgrade RN314 system's firmware to 6.7.5 because I no longer can access to the admin page (Netgear RAIDar reports "Management service is offl...
It sounds like the firmware `.img` file might not be detected due to either file location or format issues. Try these steps: 1. **Rename the file** to exactly: `ReadyNASOS.img` (remove versioning from the filename). 2. **Place it in the same folder** as the `usbrecovery.exe` before launching the tool. 3. **Run the tool as Administrator** on Windows 10. 4. If still blank, try moving both files to a simple directory path like `C:\RecoveryTool` (to avoid long file paths or permission issues). Also, make sure: * The USB drive is **formatted as FAT32**. * You're using the **x86\_64** version of the firmware since the RN314 is a 64-bit Intel-based device. Let me know if this helps!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
