Issue finding ISCI target with ReadyNAS DUO

Target iqn.2001-04.com.example:readyduo.iscsi.target0
# Users, who can access this target. The same rules as for discovery
# users apply here.
# Leave them alone if you don't want to use authentication.
#IncomingUser joe secret
#OutgoingUser jim 12charpasswd
# Logical Unit definition
# You must define one logical unit at least.
# Block devices, regular files, LVM, and RAID can be offered
# to the initiators as a block device.
Lun 0 Path=/c/iscsi_0,Type=fileio
# Alias name for this target
# Alias SunStorage
# various iSCSI parameters
# (not all are used right now, see also iSCSI spec for details)
# MaxConnections 8
# InitialR2T No
# ImmediateData Yes
#MaxRecvDataSegmentLength 8192
#MaxXmitDataSegmentLength 8192
#MaxBurstLength 262144
#FirstBurstLength 65536
#DefaultTime2Wait 2
#DefaultTime2Retain 20
#MaxOutstandingR2T 8
#DataPDUInOrder Yes
#DataSequenceInOrder Yes
#ErrorRecoveryLevel 0
# HeaderDigest CRC32C,None
# DataDigest CRC32C,None
# various target parameters
#Wthreads 8

/etc/iet/ited.conf is the location the file. I did download the file using Wget but it doesn't appear to exist anymore so i copyed and pasted the information from the guide using WinSCP

Thanks
Steven