NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Questions
3274 Topics
Spurious UPS Alert?
My first post on the forum, though been a lurker for sometime :) I have installed a ReadyNAS Duo for a small office and also supplied an APC UPS BK350EI (a.k.a. CS-350) Everything is working fine however two weeks after the UPS was installed I have received an email alert:- UPS battery error. Please replace the battery The strange thing is the UPS front panel "Replace Battery" LED is not lit. Has anyone had problems with similar spurious/strange UPS alerts?3.5KViews0likes11Comments
OS re-install ... simple and easy !
I'm trying to do a "OS re-install" on my "ReadyNAS DUO v1" and I have found the "How do I access the boot menu on my ReadyNAS Duo / NV / NV+ / X6/600?" As I read the paper a "OS re-install" (NOT affecting the data on the disc !) is done thie way: 1) the system has power ON and running normally 2) the reset switch is pressed for 5 sec and the released the text says something about a LED that will flash 1 time - what LED - I have a LED in the power button, an ACT and one for each drive 1 and 2 ? Can somebody please teach me in this - doing a OS re-instal ?4.8KViews0likes7Comments
How to cCheck Size of a share/folder?
I may be missing something very simple here but I can't seem to view the size of a share or any folder via the web admin -> shares menu. When using the list view, there are 4 columns;Name, Type, Size and Date. From a top level view, 'Size and 'Date' are blank for all my shares. Going one level down i.e. click on a share name, the size is still blank but the date field is now populated. What am i missing?10KViews1like16Comments
NAS Utils for iPhone/iPad Beta
Hey everyone! Following up on the huge success of NAS Utils for Android, I've been hard at work on an iPhone version! It's been a long time coming, but I should have a basic version ready to go in a couple weeks. I'd like to get this in front of a few people and get some feedback before publishing to the app store. Send me your email address (via PM) if you want to participate, and I'll let you know when I have a beta ready. Thanks, Mike8.5KViews0likes34CommentsTwo ReadyNAS boxen not recognized by Windows 10 Preview
Hi all, I have two ReadyNAS boxen on my system, an old DUO and a newer 102. I have Windows 10 Preview running in a VM and it will not connect to either NAS. They do not show up under "Network", which they do under Windows 7. The are visible under "Storage" but error out when I attempt to connect (Error 0x80004002: No such interface supported and https://192.168.1.9/admin, displayed twice). entering \\NAS or \\Media-NAS into the address bar yields "Windows cannot access \\NAS, check the spelling, etc" Error code 0x80004005 Unspecified error. If I put in the IP address of either box I can access the control panel interface using my browser but I cannot access resources on it. I also need to provide a permanent security exception to each RAID box. I am running Radiator 4.1.1.4 firmware on the DUO and 6.2.4 on the 102. I need to solve this before the Windows 10 rollout, which will update all ten PCs in my home/home-office. Thanks in advance. EDIT: After trying a few times with the Media-NAS (the 102), it is showing up normally under Network. But the DUO is not. I have CIFS and AFS protocols enabled on the Duo. Cannot go any further with the Duo, which is severely problematic since that's where my non-media backups and business files are located.18KViews0likes25CommentsMoving disks from Readynas Ultra 2 to RN314
Hi, I’ve just bought a RN314 to replace my Readynas Ultra 2. Can I put my two 2tb x-raided drives from my ultra 2 straight into my new RN314 without loosing any data ? I’ve also bought 2 fresh 4tb drives to add to the additional 2 bays to make a total of 6tbs of raided space. Will this work ? Cheers Dan3.9KViews0likes13Comments
RN102 - can't connect to web-interface after uninstalling app
Hi, I’m new user here because I have problem whit my ReadyNas 102 Can't connect to the web-interface (web admin panel). Installed and uninstalled the ReadyNAS Photos II app. Already tried to instal the new beta firmware 6.2.3 with the boot menu but no luck I hope someone here can help me.Solved8KViews0likes25CommentsAborting a balance
I'm running 6.2.2 on a RN104 with 3x3TB and scheduled a balance a couple of days ago. I had 25GB free, which seems to cause the balance to take a very long time. After about 20h the display still said "0% done", so I figured I'd restart and try to make some more free space available. However, after selecting Restart from the web interface I'm now stuck at the "See you soon" display because the system seems to wait with the restart until the balance is done. :( All services seems to have shut down. I can't access the NAS via ssh or file sharing any more. But the disks are working hard, so it's not locked up. I've now waited 48h after the restart attempt and it still hasn't restarted. The balance has been running 3 days... Any ideas on how long it will take to complete the balance? Any suggestions of what I can do? I obviously can't wait several weeks for it to complete but I'm hesitant to force a restart by pulling the plug after reading stories of the NAS becoming unbootable.12KViews0likes34Comments
LSB issue on leafp2p
Hi, May be not the correct section, but I didn't find anything reporting this issue. I have upgraded to last 6.2.4, and fall to: insserv: warning: script 'leafp2p' missing LSB tags and overrides insserv: There is a loop between service logitechmediaserver and leafp2p if stopped insserv: loop involving service leafp2p at depth 2 insserv: loop involving service logitechmediaserver at depth 1 insserv: Stopping leafp2p depends on logitechmediaserver and therefore on system facility `$all' which can not be true! insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header Comparing /etc/init.d/leafp2p with my previous 6.1.9, all LSB comment section has disappear in the last version... Adding back ### BEGIN INIT INFO # Provides: leafp2p # Required-Start: $network $remote_fs $syslog # Required-Stop: $network $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: P2P functionality for addons and applications ### END INIT INFO solved my issue. Any reason that it disappear between 6.1.9 and 6.2.4 ? Regards,5.6KViews3likes6Comments
