NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Just upgraded to 6.7.0....
And the NAS is stuck at 99% booting up, If there are any Beta testers about, Just wondering if this is normal due to the significant changes in the firmware, or if it's borked for the second time in ...
Try an OS Re-install. If that doesn't fix it it would be best if I could have a remote look at the systems to investigate.
I just finished upgrade from OS 6.6.1 to 6.7.0 on ReadyNas Pro 6 and I noticed that the format of Status section of Performance screen is different now:
With OS 6.6.1 it was
With OS 6.7.0 it is
Is a bug or a feature?
Is your window a bit smaller? Perhaps see if making your window a bit bigger makes any difference.
I cannot see the images posted by RoundRobin, but I think I have the same issue. No matter how wide the browser* window is, the Drives/UPS window stays static and scrunched the same size between Status and the fan information under the Performance tab. This is only happening in the Admin Page for the ReadyNAS 628. The Drives/UPS area under the Performance tab of the Admin Page for the ReadyNAS Ultra 6 Plus looks and behaves normally—like it has in the past. Both the 628 and the U6P have been upgraded to 6.7.0.
*Safari, Opera, Firefox, Chrome.
Have you tried clearing your web browser cache, closing your web browser then reopening it?
Have you tried multiple different web browsers?
My view in 6.7 is exactly the same as it was in 6.6.1
Platypus69 wrote:
My view in 6.7 is exactly the same as it was in 6.6.1
What model NAS? Arm and x86 might behave differently.
I am definitely seeing the problem on my RN526x.
Sorry... Long day :catlol:
RN316 (RN31600) | 6.7.0 | 6 x 4TB WD Red (WD40EFRX) | X-RAID | RAID5
It is known issue for the format of Status section of Performance screen on 6.7.0,
Thanks for your report.
After Upgrading RN2120 to 6.7.0 from 6.6.1 admin page is inaccessable, it shows "connecting to readynas admin page", but after some time it shows that it can't connect. Files are accessible through samba for few minutes only after start! Can't do OS reinstall as steps described in manual does not work. 1) holding reset button when starting NAS makes red, two blue led blinking, and green stready on. At this stage I press reset button, but leds doesn't change.
Need urgent solution how can this be fixed!
norcis wrote:After Upgrading RN2120 to 6.7.0 from 6.6.1 admin page is inaccessable, it shows "connecting to readynas admin page", but after some time it shows that it can't connect. Files are accessible through samba for few minutes only after start! Can't do OS reinstall as steps described in manual does not work. 1) holding reset button when starting NAS makes red, two blue led blinking, and green stready on. At this stage I press reset button, but leds doesn't change.
Exactly same situation as I have. In addition, afterwards I have updated my RN102 with 6.7.0 FW via nas_ip_address/fwbroker and situation is the same, only now power button is blinking all the time! Later this evening I will try to boot NAS in volume read only mode in roder mode to try to backup the data.
I would really expect some feedback from NetGear - even only to state that there is a bug, which we don't know how to solve right now! In this thread we have more and more complains of unlucky customers, without any respond from NetGear to manage customer expecation. I know that we have to be patient, but nevertheless I would really expect some comforting feedback e.g. we will release 6.7.1 FW in a week in order to restore funcitonality of yours NAS.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
