NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Keep getting NETWORK CHANGED message since upgrading to 6.9.0
Yesterday I upgraded the firmware on my RN 316 to the latest firmware 6.9.0. Since upgrading I have noticed that I keep getting the words NETWORK CHANGED on the NAS display which will then change to ...
Thanks for the detailed information. We are now able to duplicate the issue using a Nighthawk S8000 switch. After updating the firmware to the version I mentioned earlier, the problem went away. You can now download 6.9.1-T119 here, and it should resolve the issue. Please confirm if it works for you.
Oh that is good news Tinyhorns. The sooner a fix is out the better as I have not been able to even attempt a backup of my server since upgrading to 6.9.0 and I would be devastated if something happened to a hard drive on it between now and the fix being released.
It does make me wonder how much testing was carried out prior to releasing 6.9.0 though. Considering the network connection resets/drops (whatever!) as soon as you put a read/write load of as little as 1GB on it, this should have easily been picked up in the development stage and most definitely in the UAT stage.
amrob2 wrote:
Considering the network connection resets/drops (whatever!) as soon as you put a read/write load of as little as 1GB on it, this should have easily been picked up in the development stage and most definitely in the UAT stage.
FWIW, this is not showing up on my two RN52x systems. So it might not be that easy to detect (even though it is clearly impacting some users).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
