NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Keep getting NETWORK CHANGED message since upgrading to 6.9.0
Yesterday I upgraded the firmware on my RN 316 to the latest firmware 6.9.0. Since upgrading I have noticed that I keep getting the words NETWORK CHANGED on the NAS display which will then change to ...
Thanks for the detailed information. We are now able to duplicate the issue using a Nighthawk S8000 switch. After updating the firmware to the version I mentioned earlier, the problem went away. You can now download 6.9.1-T119 here, and it should resolve the issue. Please confirm if it works for you.
davidr1 using ssh, you can see what the kernel thinks about bonding.
That requires enabled ssh tho, and Im not sure thats the recomended way.
But, my flapping bond shows up in the default log-view in the webgui.
if you have ssh enabled do the following.
# dmesg -T
dmesg will show the message buffer of the kernel, -T will show you timestamps instead of epoch-time.
// T
Tinyhorns wrote:davidr1 using ssh, you can see what the kernel thinks about bonding.
That requires enabled ssh tho, and Im not sure thats the recomended way.
But, my flapping bond shows up in the default log-view in the webgui.
if you have ssh enabled do the following.
# dmesg -Tdmesg will show the message buffer of the kernel, -T will show you timestamps instead of epoch-time.
// T
File attached. Note that the NAS has just been turned on.
David
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
