NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Latest Firmware 4.1.16
I ran the Firmware 4.1.16 that Netgar issed and followed the normal process and nwo I am unabel to gian acces to the Admin page. I can see the data and can view in in SSH but not in the Admin page an...
Thanks for the help. Still no go and have decided to do a Factory re-set. The steps got very close and at one point it was send, me emails saying nothing or "Dead. This volume is no longer available. (VarkWork)"
Now rebuilding Raid. I will accept this as a solution.
Roger
As I suspected you need to re-install the PHP add-on manually.
Copy the add-on to a share on the NAS then use cp to copy it to /tmp
Then do e.g.
# cd /tmp # mkdir /tmp/PHP123 # cd /tmp/PHP123 # dd if=/tmp/PHP_addon.bin skip=1 | tar -xv (N.B. replace PHP_addon.bin with whatever the addon is called) # sh install.sh # cd
You can then try restarting apache using the command I gave above again and if it still doesn't work look for what new errors you get.
There is an APT add-on but installing that and using that won't solve this problem and could even make things worse if used inappropriately.
Thanks for the help. Still no go and have decided to do a Factory re-set. The steps got very close and at one point it was send, me emails saying nothing or "Dead. This volume is no longer available. (VarkWork)"
Now rebuilding Raid. I will accept this as a solution.
Roger
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
