NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Local SSH works, remove SSH fails even with port-forwarding
I have enabled SSH, and locally works fine for the accounts that have SSH enabled. However, when I port forward port 22 to the NAS, it doesn't respond when trying to use SSH (on laptop/phone when...
I enabled DMZ on the router to point to the NAS and works fine - so it's the router 🙂
Thanks for your input guys - I haven't done basic h/w troubleshooting for several years now, so a revisit is always good.
Note: I've secured the NAS now that I know what was causing the issue.
q3d wrote:
Yes, both NIC's are being used
Name: bond0
MTU 1500
Over eth0, eht1
IP Settings; DHCP
Mode: Adaptive Load Balancing (primary = eht0)
Try disconnecting eth1 and see if that makes any difference.
I enabled DMZ on the router to point to the NAS and works fine - so it's the router 🙂
Thanks for your input guys - I haven't done basic h/w troubleshooting for several years now, so a revisit is always good.
Note: I've secured the NAS now that I know what was causing the issue.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
