NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Move Disks from Ultra 6 Os 6 to RN 316
I'm replacing my Ultra 6 which I upgraded to OS 6.5.1 with a RN316,
Can I just move the disks (6x4) to the new unit w/o any issues?
Personally it would be my preference to:
- Put a scratch disk (must not be from your array) in the RN316
- Update the firmware on the RN316 to 6.5.1
- Verify that the update was successful
- Power down both units, remove the scratch disk and move the disks across keeping the order the same.
But you should be able to just power down both units and move the disks across keeping the order the same.
3 Replies
Replies have been turned off for this discussion
Personally it would be my preference to:
- Put a scratch disk (must not be from your array) in the RN316
- Update the firmware on the RN316 to 6.5.1
- Verify that the update was successful
- Power down both units, remove the scratch disk and move the disks across keeping the order the same.
But you should be able to just power down both units and move the disks across keeping the order the same.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
