NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NAS 314 + mv_xor_status+88
Hello, After inserting a 4th disk in the bay, it started to resync the data. But now it is showing "mv_xor_status+88" on the display. I can't do anything on the webpage. Just "Set up a new Ready...
Normally this shows up in the RN104, not the RN314.
There was a fix in 6.5.2 firmware (though it does specify the RN104). RAIDar should tell you the firmware you are running ( http://kb.netgear.com/app/answers/detail/a_id/20684/~/readynas-downloads#raidar ). You could also try https://nas-ip-address/fwbroker
It's concerning that you are getting the start-up wizard. Have you tried accessing the data with file explorer or finder?
You might need to try forcibly powering down the NAS, removing disk 4 and then rebooting. Or if you purchased your RN314 new between 1 June 2014 and 31 May 2016, you could use your lifetime chat support at my.netgear.com.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
