NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NAS 314 + mv_xor_status+88
Hello, After inserting a 4th disk in the bay, it started to resync the data. But now it is showing "mv_xor_status+88" on the display. I can't do anything on the webpage. Just "Set up a new Ready...
You could go to https://192.168.10.137/fwbroker and update to at least 6.5.2
You will need to reboot the NAS before you can access this page, I think.
Ok, thank you for letting me know.
I took the 4th disk out and rebooted and the NAS is now DEGRADED and is recyncing.
I guess I have to wait for the recync to finnish before I can upgrade???
You do not need to wait. It's recommended to wait but you will likely run into the same problem again if you don't update the firmware so I would update the firmware.
Is your backup up to date?Yes, I had some less important data that was not on backup... but now I have everything on backup.
I managed to get the update file from the System/setting page after downlading a Zip file and extracting it.
System is now 6.5.2 and is resyncing with 56% done.
The 4th disk which caused the error "mv_xor_status+88"... can I just insert it again, when resyncing is finished,
or do I need to format it before I insert it in the NAS???
Hi NisseH,
Better format the 4th disk first.
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
