NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NAS to NAS Rsync Backup
Hi, need help for configuring the rsync backup between 2 RN314. It doesnt work with any parametres. If in path for destination i put nothing then it can't find module name, if i put the share name, t...
Yes, the rsync activated on both shares,
For push backup job, the source is "Share", and for distanation the remote rsync with ip of another NAS and "sauvegarde" for the path.
The log of result:
There is no athentication on distanation share.
If distanation path not configured, the error is next:
For push backup job, the source is "Share", and for distanation the remote rsync with ip of another NAS and "sauvegarde" for the path.
The log of result:
Backup Job Name: Nas2Nas
Backup Job Type: Incremental
Protocol: rsync
Backup Source: [Sauvegarde]/
Backup Destination: [remote:rsync]/192.168.6.63::sauvegarde::
Backup Start Time: Tue May 27 2014 20:57:07
Backup Finish Time: Tue May 27 2014 20:57:07
Backup Status: Fail: connection cannot be established. Please check the connection and authentication, if required.
@ERROR: Unknown module 'sauvegarde::'
rsync error: error starting client-server protocol (code 5) at main.c(1534) [sender=3.0.9]
There is no athentication on distanation share.
If distanation path not configured, the error is next:
Backup Job Name: Nas2Nas
Backup Job Type: Incremental
Protocol: rsync
Backup Source: [Sauvegarde]/
Backup Destination: [remote:rsync]/192.168.6.63::
Backup Start Time: Tue May 27 2014 21:05:58
Backup Finish Time: Tue May 27 2014 21:06:00
Backup Status: Fail: connection cannot be established. Please check the connection and authentication, if required.
ERROR: The remote path must start with a module name not a /
rsync error: error starting client-server protocol (code 5) at main.c(1534) [sender=3.0.9]
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
