NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
New 316 (diskless) and upgrading to 6.2 before I start
Just purchased a 316 to replace an original Readynas, I also have a Readynas Pro Pioneer edition too. The diskless 316 box is labelled as having V6.1.6 firmware Questions: Should I upgrade to V...
Thanks for the feedback.
I waited for the initial X-Raid Raid 5 build to complete before switching to Flex-Raid and adding the new disk. I then started the rebuild and switched back to X-Raid. The unit has continued the rebuild overnight. It has been churning away for 12 hours and has completed 5.89% of the rebuild. It is still reporting that the process will take more than 200 hours. I'm not doing anything else with the unit at the moment and will wait until the rebuild is finished before adding data.
I waited for the initial X-Raid Raid 5 build to complete before switching to Flex-Raid and adding the new disk. I then started the rebuild and switched back to X-Raid. The unit has continued the rebuild overnight. It has been churning away for 12 hours and has completed 5.89% of the rebuild. It is still reporting that the process will take more than 200 hours. I'm not doing anything else with the unit at the moment and will wait until the rebuild is finished before adding data.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
