NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
New 316 (diskless) and upgrading to 6.2 before I start
Just purchased a 316 to replace an original Readynas, I also have a Readynas Pro Pioneer edition too. The diskless 316 box is labelled as having V6.1.6 firmware Questions: Should I upgrade to V...
Well it should just continue the resync when you boot up again.
That resync time is to long. I have a 316 with five 4tb drives in Xraid with dual redundancy, a resync takes <24 hours.
When you power down I would also test all the disks using vendor tools. I do this with all new ( and used) disks before use in the nas.
That resync time is to long. I have a 316 with five 4tb drives in Xraid with dual redundancy, a resync takes <24 hours.
When you power down I would also test all the disks using vendor tools. I do this with all new ( and used) disks before use in the nas.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
