NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
No Admin Page and Power Button Reset Does not work.
My ReadyNAS admin page continually goes offline, when it does the buttons on the front do not work at all, the only way to get back into the admin page is to unplug the power cord and then plug it ba...
Gazzacoop wrote:
I have read all forums and tried everything, what next?
Try downloading the log zip file.
Look in disk_info.log at the smart stats.
Also look in volume.log - scroll down to the bottom, and you'll see a section that looks like this:
=== df -h ===
Filesystem Size Used Avail Use% Mounted on
udev 10M 4.0K 10M 1% /dev
/dev/md0 4.0G 710M 3.0G 20% /
...
check to see if /dev/md0 is full.
Hi Stephen,
Here is my Volume Log,
== df -h ===
Filesystem Size Used Avail Use% Mounted on
udev 10M 4.0K 10M 1% /dev
/dev/md0 3.7G 817M 2.7G 24% /
Here is my disk_info.log
Device: sda
Controller: 0
Channel: 0
Model: ST10000VX0004-1ZE101
Serial: ZA214AVR
Firmware: AV01
Class: SATA
RPM: 7200
Sectors: 19532873728
Pool: data
PoolType: RAID 1
PoolState: 1
PoolHostId: 601b366d
Health data
ATA Error Count: 0
Reallocated Sectors: 0
Reallocation Events: 0
Spin Retry Count: 0
End-to-End Errors: 0
Command Timeouts: 0
Current Pending Sector Count: 0
Uncorrectable Sector Count: 0
Temperature: 43
Start/Stop Count: 15
Power-On Hours: 2064
Power Cycle Count: 15
Load Cycle Count: 11841
Device: sdb
Controller: 0
Channel: 1
Model: ST10000VX0004-1ZE101
Serial: ZA213VNG
Firmware: AV01
Class: SATA
RPM: 7200
Sectors: 19532873728
Pool: data
PoolType: RAID 1
PoolState: 1
PoolHostId: 601b366d
Health data
ATA Error Count: 0
Reallocated Sectors: 0
Reallocation Events: 0
Spin Retry Count: 0
End-to-End Errors: 0
Command Timeouts: 0
Current Pending Sector Count: 0
Uncorrectable Sector Count: 0
Temperature: 42
Start/Stop Count: 15
Power-On Hours: 2039
Power Cycle Count: 15
Load Cycle Count: 11859
I am not sure what I am looking for?
I wanted to see the disk health and the OS partition free space. Both look fine, so they are not the problem.
I used to have a similar problem with my RN102, and it was linked to Plex's rescan of the media library (looking for metadata). Perhaps try turning off plex for a couple of days, and see if the problem stops?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
