NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NV+ Transfer rates
GDay All, I have just installed a RND4000 V3 NV+ onto my network and I'm a little disappointed with the transfer speeds. At best I get an average of 7.2mb/s up and down which is dismal compared to ...
Sorry for the delayed response, I've been a bit busy with other things.
I tried with 'Interrupt Moderation' disabled, no change.
I checked 4K sectors but I'm using 16384. I think I had 4.1.6 installed from the start. The first thing I did though was to update the firmware to 4.1.8. It may have been part of the install procedure, not sure now.
Went through all the logs looking for clues. Only thing I found was that the NTP servers, time-e.netgear.com & time-h.netgear.com, don't work in my neck of the woods, so I changed to time.microsoft.com.
There are quite a few errors in httpd_errors.log though.
With the NAS back on the network, I'm seeing around 12MB/s Read and 14MB/s, but nothing I have tried has improved things from there.
I tried with 'Interrupt Moderation' disabled, no change.
I checked 4K sectors but I'm using 16384. I think I had 4.1.6 installed from the start. The first thing I did though was to update the firmware to 4.1.8. It may have been part of the install procedure, not sure now.
Went through all the logs looking for clues. Only thing I found was that the NTP servers, time-e.netgear.com & time-h.netgear.com, don't work in my neck of the woods, so I changed to time.microsoft.com.
There are quite a few errors in httpd_errors.log though.
With the NAS back on the network, I'm seeing around 12MB/s Read and 14MB/s, but nothing I have tried has improved things from there.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
