NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NV+ v2 wrong capacity after expansion; 2TB instead of 3TB
Hello @all, I have an ReadyNAS NV+ v2 with RAIDiator 5.3.7 and a Flex-Raid-Configuration with JBOD. I use a 3TB hard drive and 2x2TB hard drives. I added another 3TB-HDD in Bay 4. After a few mi...
As the first, thank you for your help. I have now found the solution.
My problem is a bug in the firmware. These always uses the smallest HDD as an reference for the capacity when a new disk is added in JBOD mode. This is regardless of drive bay. After I had backed up the data of the two 2TB HDDs and these were removed. The 3TB HDD is correct formatted with 3TB.
My problem is a bug in the firmware. These always uses the smallest HDD as an reference for the capacity when a new disk is added in JBOD mode. This is regardless of drive bay. After I had backed up the data of the two 2TB HDDs and these were removed. The 3TB HDD is correct formatted with 3TB.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
