Please remove inactive volumes in order to use the disk. Disk #1,2 - #25684491

My ReadyNAS 104 that has begun to do the same thing.  I started receiving errors the other day and then it went "offline".  I replaced the drive that the logs were indicating was becoming faulty and that allowed me to get back in to the web interface to try and see what my options are.  I tried every recommendation that I found online but nothing seems to work.  I put in a brand new (no partitions or formatting) drive but the RAID array will not rebuild/resync.  

The last suggestion I tried was to update the firmware to 6.2.5 (which updated successfully).  I now have a couple more options (like being able to format the individual drives which I tried doing on the new blank one to be sure) but removing the drive and replacing it does not cause a resync/rebuild to happen.   

I can see the shares but I cannot access them and the only message displayed is to "remove the inactive volumes in order to use the disk". 

I have SSH enabled and the drive I used to replace the faulty one is the same make and model.  

Whats the purpose of having a RAID if a drive is replaced and it wont rebuild properly?!

PLEASE HELP!