NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Problem booting ReadyNAS NV after IP address change to DHCP
I have a ReadyNAS NV that has been running fine. However, I today changed from a hard coded IP address on an old subnet, to DHCP. It gave me a warning about not being able to access when the IP change...
How do I get an image that will boot my NV? The only one I found was here:
http://www.readynas.com/kb/faq/boot/how_can_i_perform_a_boot_recovery_using_a_usb_flash_device
http://www.readynas.com/download/support/ReadyNAS_USB_Flash_Recovery-4.1.10.img
I have tried the USB boot, but it gave the blinking pattern that the firmware that says:
"RAIDiator image does not match NAS platform, contact tech support to convert OEM NAS to ReadyNAS."
Is my old NV Sparc, or something else?
I can try and scrounge up an old disk, and will try a fresh install.
http://www.readynas.com/kb/faq/boot/how_can_i_perform_a_boot_recovery_using_a_usb_flash_device
http://www.readynas.com/download/support/ReadyNAS_USB_Flash_Recovery-4.1.10.img
I have tried the USB boot, but it gave the blinking pattern that the firmware that says:
"RAIDiator image does not match NAS platform, contact tech support to convert OEM NAS to ReadyNAS."
Is my old NV Sparc, or something else?
I can try and scrounge up an old disk, and will try a fresh install.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
