Q: change raid0 volume name?

Well, I almost nailed it.
For future refetence, this is what I did:


with only original disk [d] to copy:

root ~ # vgs

  VG   #PV #LV #SN Attr   VSize VFree
  d      1   1   0 wz--n- 1.81T 5.00G


root ~ # lvs

  LV   VG   Attr   LSize Origin Snap%  Move Log Copy%
  d    d    -wi-a- 1.81T

-> only one volume appeared

vgchange -a n
vgrename /dev/d /dev/c
lvrename /dev/c/d /dev/c/c

reboot 2x

shutdown

Insert new disk [d]
create new volume [d] (in frontview)

start
reboot 2x

copy contents from original [d] (now [c]) to new [d]

rsync -av --stats /c/recordings/* /d/recordings

reboot

shutdown

remove original disk [d] which is now disk [c]

start + reboot

shutdown

insert original disk [c]

start

-> new disk [d] not recognized

root ~ # mdadm --examine --scan
ARRAY /dev/md/2 metadata=1.2 UUID=060d371f:28bca8e5:bed47ae0:4a196b61 name=E091F58AD37A:2
ARRAY /dev/md/0 metadata=1.2 UUID=2f7dfbb0:adfa39f9:bb6da5bf:c85762bf name=E091F58AD37A:0
ARRAY /dev/md/1 metadata=1.2 UUID=da6a5053:e8870122:3644d00c:1346d084 name=E091F58AD37A:1
ARRAY /dev/md/2 metadata=1.2 UUID=cbed02fd:fb7d7142:ffbc8472:21cde62c name=E091F58AD37A:2

root ~ # mdadm --assemble --scan
mdadm: /dev/md/E091F58AD37A:2 has been started with 1 drive.
mdadm: /dev/md/E091F58AD37A:1_0 has been started with 1 drive (out of 2).
mdadm: /dev/md/E091F58AD37A:0_0 has been started with 1 drive (out of 2).

root ~ # lvm pvscan
  PV /dev/md127   VG d   lvm2 [1.81 TB / 5.00 GB free]
  PV /dev/md2     VG c   lvm2 [461.25 GB / 10.00 GB free]
  Total: 2 [2.27 TB] / in use: 2 [2.27 TB] / in no VG: 0 [0   ]


root ~ # lvm vgscan
  Reading all physical volumes.  This may take a while...
  Found volume group "d" using metadata type lvm2
  Found volume group "c" using metadata type lvm2

root ~ # vgchange -a y
  1 logical volume(s) in volume group "d" now active
  1 logical volume(s) in volume group "c" now active

root ~ # ls -al /dev/mapper
total 0
drwxr-xr-x  2 root root      100 2012-12-09 11:43 .
drwxr-xr-x 16 root root     3560 2012-12-09 11:43 ..
brw-rw----  1 root disk 253,   0 2012-12-09 11:32 c-c
crw-rw----  1 root root  10, 236 2012-12-09 11:32 control
brw-rw----  1 root disk 253,   1 2012-12-09 11:43 d-d

root / # mount /dev/d/d /d

Now new volume [d] gets mounted.

Only when I reboot, the mount is lost and I have to do it manually.

So the remaining question is: how to get drive / volume [d] to mount at boot?