NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RAID parameters in log files
Hello all! Does somebody know if the current RAID parameters of my ReadyNAS NV+ can be found in the logs? I am looking for the following parameters: - RAID type (XRAID, RAID4, RAID5, etc) - Bl...
Thanks for you prompt reply!
StephenB wrote:
Is your array (and NAS) functioning? Are you attempting to mount in a linux system? Or something else?
My NAS was stuck on booting (see this thread). I put in four (4) new discs and the NAS itself is functioning fine again now.
Unfortunately, up till now, I am unable to recover any data from my four old discs through R-Studio, ReClaiMe, etc. probably
because I do not have the right RAID parameters. My idea is to find the parameters from the current log files in the NAS with
the new HDDs and put those parameters in, for instance, R-Studio.
svdhoorn wrote:
Unfortunately, up till now, I am unable to recover any data from my four old discs through R-Studio, ReClaiMe, etc. probably
because I do not have the right RAID parameters. My idea is to find the parameters from the current log files in the NAS with
the new HDDs and put those parameters in, for instance, R-Studio.
It's a bad sign that R-Studio and ReclaiMe aren't able to detect the RAID parameters. Have you tried this: https://www.r-studio.com/Unformat_Help/finding_raid_parameters.html
JohnCM_S and/or Marc_V should be able to track down what you need though. If they don't respond, I suspect R-Studio and ReclaiMe support both know this parameters, so they should be able to help.
StephenB wrote:
Have you tried this: https://www.r-studio.com/Unformat_Help/finding_raid_parameters.htmlYes, I have tried this, but no result. I hope @JohnCM_S and/or @Marc_V have the parameters for me. Thanks for your help!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
