NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Re boot of NAS results in a DEAD NAS
I have exactly the same problem. Blue blinking light after the upgrade to 4.1.10. I even went out and bought a new 3rd party memory stick to see if that would fix the problem, no luck. I do not have t...
Really it would be better to start a different thread.
AFAIK 4.1.10 did not break operation of 2 TB drives, and drives over 2 TB never worked on the NV, so I don't understand that comment.
I have seen several posts saying that 4.1.10 causes third party memory failures (even with memory that previously worked). Since you are using your original drives, it seems unlikely that you are having a drive issue.
At this point my advice is to put back the single fresh drive that worked, and then downgrade to 4.1.8. After that, do a second factory default with all drives in place, and restore your data from backup. Then stick with 4.1.8 firmware.
AFAIK 4.1.10 did not break operation of 2 TB drives, and drives over 2 TB never worked on the NV, so I don't understand that comment.
I have seen several posts saying that 4.1.10 causes third party memory failures (even with memory that previously worked). Since you are using your original drives, it seems unlikely that you are having a drive issue.
At this point my advice is to put back the single fresh drive that worked, and then downgrade to 4.1.8. After that, do a second factory default with all drives in place, and restore your data from backup. Then stick with 4.1.8 firmware.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
