NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Multi-Gig support for RN214 and RAX120
I have a RAX120 and RN214. Can I enable Multi-Gig support for my RN214 from my RAX120?
I received the following response from Level 2 Technical Support:
----------------------------------------------------------------------------------------
Regarding the solution you propose, it would be irresponsible for Netgear to tell you that if it works and this has not been previously tested.
I've done some research, but the unit doesn't support USB network adapters.
But, If you create a bounded (LAG between the NAS and your router) will improve performance, and that is something that can be achieved,
in case you want to get higher transfer speeds, you will have to look for other ReadyNAS, because this NAS only supports speeds up to 1 gbit.
StephenB You sure know how to trigger a response from me ;)
Back on topic: Not sure if there are any multi-gig USB type A dongles out there. If there are, there's one big problem: I haven't been able to build a working kernel driver for ARM based ReadyNAS boxes for quite a while now.
No matter if I use the GPL provided sources or if I try to build from the config that ships with the kernel on the boxes - the built drivers won't load. This is even reproducable with compiling only the stuff that already is in the running kernel without any changes / additions. Ok, I haven't tried with 6.10.4 but I expect no other outcome than with previous kernels. So unless someone at NTGR fixes this or points to where my error is there's not much chance of building any drivers for RN1xx/RN2xx right now.
Oh well, since I've got nothing better to do I'll give it another try with 6.10.4 right away ;)
-Stefan
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
