NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ready for expansion (RN Pro Pioneer Edition)-Seeking Advice
Hi Everyone. I purchased and setup my Readynas Pro Pioneer around Jan 2010. Aside from one disk issue (increasing errors, which Seagate replaced under warranty) it has been a nice experience. I ...
Update the firmware if you haven't already. You must be running 4.2.16 or later before you add the 3TB disks.
Add a 3TB disk while the NAS is on. Wait for the resync etc. to complete then add the next disk.
What disks were installed when you last did a factory default?
Note that if your volume capacity was 2.7 TB when you last did a factory default you cannot expand past 10.7 TB
Add a 3TB disk while the NAS is on. Wait for the resync etc. to complete then add the next disk.
What disks were installed when you last did a factory default?
Note that if your volume capacity was 2.7 TB when you last did a factory default you cannot expand past 10.7 TB
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
