Ready NAS Duo V2 unable to connect due to ...? SSL?

Question

I have not started my ReadyANs for some time and now that I need teh files, i cant connect. The Raidar finds the NAS and says its intact (see screenshot) but when i try to connect to it via webbrowser it says "Cannot connect due to unsecure Connection)

I have run the command that enable SMB1 (

You can enable the SMBv1 client on the desktop systems by opening CMD (right-click and "run as administrator").

Then enter

sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi
sc.exe config mrxsmb20 start= auto)

My Win11 Machine is up to date and the Raidar also. I tried opening this with Chrome, FF, IE and Opera

What am I missing here?

StephenB · Answer

Radiator&nbsp;wrote:
&nbsp;
What am I missing here?

It's not about SMB.&nbsp; It's about TLS/SSL - the NAS uses TLS 1.0, and browsers started requiring TLS 1.1 earlier this year.
&nbsp;
There is more information on this here:

https://community.netgear.com/t5/New-ReadyNAS-Users-General/Workaround-for-ERR-SSL-VERSION-OR-CIPHER-MISMATCH-problem-for/m-p/2198243

But the short answer is that you&nbsp;

can regain admin access using Internet Explorer, Edge in IE mode, or by installing an old version of firefox (94.0.2 works).&nbsp; Note you still will need to click through security warnings.
install this add-on to update the TLS protocol used by your NAS:&nbsp;https://github.com/rdynsxtrs/r5bin/blob/master/apache2/Apache2_2.2.34-arm-0.0.1.bin

&nbsp;
&nbsp;

StephenB · Answer

Radiator&nbsp;wrote:
&nbsp;
Also check out the SMB1 please. Is that correct?
&nbsp;

Yes, though you can uncheck the first option if you like (otherwise Windows will automatically turn off SMB1 if you don't use it for a while).
&nbsp;
You could try entering \192.168.1.240 in the Explorer address bar - you should see the shares list of the NAS.&nbsp; Make sure you use the correct slash (\) - if you don't, then Windows will open your browser.
&nbsp;
Radiator&nbsp;wrote:
I tried accessing the files via FTP (see attached) but i must be doing something wrong. STill getting the error message.

Go into settings, then select connection.&nbsp; Set the minimum TLS version to 1.0, and try again.

&nbsp;
&nbsp;
You can alternatively add the connection to the site manager.&nbsp; Then edit the connection settings, and disable encryption altogether.

&nbsp;

Radiator · Answer

I have acces to the Front panel now with FF94. The OS is 5.3.13 (up-to-date).

I have tried to install the add-on you mentioned, but I get the error message that "it cant be installed".

How to proceed?

StephenB · Answer

Radiator&nbsp;wrote:
I have acces to the Front panel now with FF94. The OS is 5.3.13 (up-to-date).
I have tried to install the add-on you mentioned, but I get the error message that "it cant be installed".
&nbsp;
How to proceed?

Are you using the "standalone add-on" instructions on page 77 in the manual?

https://www.downloads.netgear.com/files/GDC/READYNAS%20ARM-PLATFORM%20(DUO%20V2,%20NV+%20V2)/RAIDiator%205.3%20SW%20Manual_5Sep12.pdf

Also, did you use the download link I posted here?&nbsp; If not, make sure you are getting the arm version (for OS 5.x), and not the x86 version (for OS 4.2.x)
&nbsp;
If you are using the right instructions and have the correct add-on, you should probably create a github account, and enter an issue here:

https://github.com/rdynsxtrs/r5bin

Radiator · Answer

The Github link only links this one file "Apache2_2.2.34-arm-0.0.1.bin" thats the one i downloaded and tried to install exactly as described in the manual page 77. That resulted in the error message.So, now go to guthub and ask there 😞 ?Moving the .bin file from PC to PC using an USB stick cant be the problem, right?

Forum Discussion

Ready NAS Duo V2 unable to connect due to ...? SSL?

10 Replies

Related Content

MR6110 Unable to connect

READY NAS 104

Ready NAS 102 app problem

RS300 Unable to connect to the internet

Ready NAS 6.10.7

NETGEAR Academy

ProSupport for Business