NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ready NAS104 - Bit rot protection - silent error
I purchased and setup a ReadyNAS 104 10 days ago and set it up with 4x4TB WD Red drives. Its running firmware 6.2.2. I then copied around 3.5TB of data (mainly media files) from old USB drives to ...
The system is brand new. I put the 4 drives in it, switched it on and it upgraded to 6.2.2.
It then started to rebuild the raid array (and I left it to do that for the 40 or so hours it took) and when that was finished I copied all the data - so after the 6.2.2 upgrade.
The NAS ran without warnings for around 9 days then the first set of warnings came, another day or two then the second set of warnings.
It then started to rebuild the raid array (and I left it to do that for the 40 or so hours it took) and when that was finished I copied all the data - so after the 6.2.2 upgrade.
The NAS ran without warnings for around 9 days then the first set of warnings came, another day or two then the second set of warnings.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
