NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readynas 102 - TFTP_REQ
I have a Readynas 102. It's basically new. Was turned on for a bit, then stored in it's box until now. I turn it on and it all boots up but I get a flashing power button.
I can see the device on the network but I am unablet to connect to it.
I use RAIDar and it connects Status is TFTP_REQ
Troubleshooting steps
- confrim via a PC that I can see the HDD this appears to be working can see some patitions on it,
- perform a factory reset as per https://kb.netgear.com/22892/How-do-I-access-the-boot-menu-on-my-ReadyNAS-102-202-212-or-312
- peform the steps outlined in the usb recovery article https://kb.netgear.com/29952/How-do-I-use-the-USB-Recovery-Tool-on-my-ReadyNAS-OS-6-storage-system
I have nothing other than the ethernet cable pluged in.
I was looking at this post and it appears that someone was able to assist but the solution does not seem super clear. https://community.netgear.com/t5/New-ReadyNAS-Users-General/RN102-TFTP-REQ/td-p/1350888
I would really appreciate any assitance to get this up and running.
3 Replies
Replies have been turned off for this discussion
Is it still under warranty (3 years for the original purchaser)?
Hi hophead,
We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.
If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as a solution so others can be confident in benefiting from the solution.
The NETGEAR community looks forward to hearing from you and being a helpful resource in the future!
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
