NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS 102 not being recognised by my LG TV after updating to 6.5.0 firmware
I have been succesfully streaming from my ReadyNAS 102 to my smart LG TV ever since I got it . Recently I added a TV series onto the HDD, but my smart TV did not find the folder. Now a week later m...
Hi BilboD,
I apologize for the inconvenience this has caused you. Also big thanks for the very detailed info and troubleshooting you did on your own. Kindly check my suggestions below.
1. Disable ReadyDLNA completely under System->Settings->Services.
2. Re-enable it and rescan for local media files.
3. Once done, reconfigure the DLNA media settings of the share where the said media files are stored (tick the all checkbox).
Hope this helps!
Kind regards,
BrianL
NETGEAR Community Team
Hi BilboD,
I apologize for the inconvenience this has caused you. Also big thanks for the very detailed info and troubleshooting you did on your own. Kindly check my suggestions below.
1. Disable ReadyDLNA completely under System->Settings->Services.
2. Re-enable it and rescan for local media files.
3. Once done, reconfigure the DLNA media settings of the share where the said media files are stored (tick the all checkbox).
Hope this helps!
Kind regards,
BrianL
NETGEAR Community Team
Well, I haven'y checked through the TV yet, but I suspect your answer will have resolved the problem. On going through your steps I discovered that the DLNA option had already been deselected (possibly due to the firmware upgrade). I have enabled DLNA and rescanned so hopefully all is hunky dory. Thank you for the step through.
Bilbo
Hi BilboD,
It was nothing. Just let me know if this fixes your issue and don't hesitate to ask if you have other questions.
Kind regards,
BrianL
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
