Forum Discussion

Aspirant

Jan 11, 2022

ReadyNas 102 update 6.10.6

Hi I have been trying to update from 6.10.3 to 6.10.6 without success. I have tried it both ways, letting the system update by itself and I have tried it manually I have restarted the ReadyNas and...

IMG_0953.pnr.pdf293 KB

StephenB

Guru - Experienced User

Jan 11, 2022

Can you download the log zip file from the logs page?

Then check the OS partition fullness (not the same as the volume fullness). Open volume.log, and scroll down to the df -h section

=== df -h ===
Filesystem      Size  Used Avail Use% Mounted on
udev             10M  4.0K   10M   1% /dev
/dev/md0        4.0G  645M  3.0G  18% /
tmpfs           3.9G     0  3.9G   0% /dev/shm

The /dev/md0 line is the OS partition. Generally it is less than 25% full.

Right under that is the df -i section (that gives info on free inodes). Generally the % used is abouut 1%.

Let us know what you see.

ibrujo

Aspirant

Jan 12, 2022

Hi StephenB

Thank you for your reply and help.

I followed your instructions, however, I do not see "df" nor "df -h".

I am attaching an alphabetical list of the logs for your review.

Any suggestions?

Thank You

Mario

StephenB
Guru - Experienced User
Jan 12, 2022
ibrujo wrote:

I am attaching an alphabetical list of the logs for your review.

There are a lot more after http.
- ibrujo
  Aspirant
  Jan 12, 2022
  Hi
  I found it, this is what it says:
  === df -h ===
  Filesystem Size Used Avail Use% Mounted on
  udev 10M 4.0K 10M 1% /dev
  /dev/md0 4.0G 3.9G 0 100% /
  tmpfs 249M 0 249M 0% /dev/shm
  tmpfs 249M 35M 214M 14% /run
  tmpfs 125M 1.4M 123M 2% /run/lock
  tmpfs 249M 0 249M 0% /sys/fs/cgroup
  /dev/md127 2.8T 1.4T 1.5T 49% /data
  /dev/md127 2.8T 1.4T 1.5T 49% /apps
  /dev/md127 2.8T 1.4T 1.5T 49% /home
  /dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Backup
  /dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/BI_Storage
  /dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Documents
  /dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Downloads_Folder
  /dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Music
  /dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Pictures
  /dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/readydrop
  /dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Videos
  tmpfs 4.0K 0 4.0K 0% /home/mmartinez/snapshot
  === df -i ===
  Thank you
  Mario
  - StephenB
    Guru - Experienced User
    Jan 13, 2022
    ibrujo wrote:
    
    === df -h ===
    Filesystem Size Used Avail Use% Mounted on
    /dev/md0 4.0G 3.9G 0 100% /
    
    Reformatted slightly so the columns line up.
    
    The OS partition is full. If you already know how to use the linux command line, it is possible to fix this yourself.
    
    But if you don't know how to use ssh, then it would be best to contact Netgear support, and have them fix it remotely. They will require you to purchase a service contract - no idea what that costs, perhaps JeraldM can give you guidance on exactly what contract you will need and current pricing for your geography.