NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Readynas 104 - Slow transfer speeds
Hi all Can someone please tell me if the transfer speeds i am seeing are normal. I am pretty sure that i use to see around 70Mb but now i am only seeing 10Mb, both directions. When i transfer...
Hi
I have managed to solve the issue, it looked to be an issue with my RJ45 terminations. I put a cable tester on each end and the pinouts where terminated incorrectly using only 6 pins out of 8. This was giving me 100Mb connection. I then re-terminated the connections and tested and the interfaces are now showing 1Gb connection with all 8 pins being used.
Thanks
Hello just creating my forum account to ask the EXACLY same question.
My Speed a lmitited to 10 mo/s up and down since 6.6 update.
I'am actualy running 6.6.1 on RN104
Is your NAS reporting that it has a 1000Mbit (Gigabit) connection or a 100Mbit one?
nas interface say 100 Mbps !!
what to do ?
EDIT : ok just change port from eth0 to eth1 and my nas card running 1 gbps.
Have ~20 Mo/s upload and ~35 Mo/s download as i had before 6.6.0 upgrade.
:) is there any way top improve the speed alittle more ?
Ostro wrote:
Have ~20 Mo/s upload and ~35 Mo/s download as i had before 6.6.0 upgrade.
Since you did negotiate the wrong speed at least once, perhaps try a different ethernet cable (or router/switch port). The cable should be at least Cat5e.
It should be possible to get 70 MB/s download and ~35 MB/s upload with RAID-5.
Do you recall what firmware was installed when you first purchased the NAS? There have been adjustments to the low-level volume settings over time. If your volume is very old, starting fresh with a factory reset (restoring data from backup) might improve performance. I did that last spring with my RN102, and it jumped from about 35 MB/s download to 70.
My Nas is connected to the 1G port and NAS reports 1G connection too.
Maximus360 wrote:
My Nas is connected to the 1G port and NAS reports 1G connection too.
Is readycloud installed on the PC? If so, try disabling the Leaf VPN adapter and see if anything changes.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
