NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNas 212
Have a Netgear ReadyNas 212 with 2 x 3TB disks configured for RAID. The disk models are different (1 is a Seagate 3TB IronWolf and the other a 3TB Toshiba P300) but have worked together fine for ove...
You can also run the disk test from the volume settings wheel. That will test both drives. Wait for the resync to complete though.
One drive may be the real culprit, but is affecting the whole SATA subsystem. Or, the hardware could be failing.
But, that's one 7200RPM drive and one 5900RPM? I had a similar problem with a legacy NAS and a mix of drive speeds, and it was related to how long it took the drives to spin up from idle. I'd check the logs to see if the problem arises at that point. Turning off drive idle spin-down could be a solution -- it was for me, though that was on a very different OS version.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
