NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas 214
So on February 16, 2021 we had a winter storm here in Texas. On that date we lost power, regained, lost, regained, lost (for 20 hours), regained. I at some point did power down system and the rest ...
Can you see if the LAN activity light is still active when the transfer goes to zero? Although a factory default is probably the best thing to try first, you could have a failing power supply. The NIC subsystem is powered by the +5VSB (+5 volt standby) part of the power supply, which powers only the NIC and power on/off circuits. Even if the NAS is "off", that power is still on unless the plug is pulled. Multiple mains power cycles, especially any "brownout" conditions in between, may have damaged that portion of the supply.
While the supply appears to be a standard flex ATX (aka mini ITX) supply, the pin-out is non-standard. If a factory default doesn't fix the problem, then using an adapter cable and a standard ATX supply (if you have one available) externally is a good way to check if the power supply is the problem.
Would be best to check on the full logs. You can share it to me via Google drive or a similar service. PM me the link so we can check if the issue with the NAS.
HTH
Sent
In a previous topic (2018) I was asked to send a top command in ssh. I have completed that.
Marc_V The ysstem seems to be going from like 2 mb/s to 0 then a about 10 seconds latere back to 2 then 0. Whats the quickest way to get the files off? I am trying to clear storage so that I can factory default the machine. It seems to have problems with Amazon Drive, Email Service, and possibly the maintanance tasks.
- Is there anybody else who has any idea why my system is doing this?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
