NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS 312 V+12 voltage in enclosure Internal is out of spec. (10.72 V).
ReadyNAS 312 - 6.10.8 - 2 * WD Red 2TB Bought the 312 without a PSU and it worked fine with my old ReadyNAS Duo power supply (12v 5a) and the first WD Red (this was to replace an ageing NV+ v2 also ...
Hi Sandshark
Thanks for the information on ATA errors and their location.
The NAS had marked the drive as failed and marked the volume as 'degraded' (i.e., not mirrored).
I measured the input voltage on the mainboard connector as 10.7v while the centre pin of the connector was 12.?v. I re-soldered the center pin to connector leg connection and seem to have solved the problem.
I re-inserted disk 2 and the NAS rebuilt it overnight. System seems to be fine now. No more system voltage warnings today, so I cancelled the Amazon return.
Cheers, Aidan
I suggest running the vendor diags (Seatools or WD's Dashboard). If you can't do that, then run the disk from the volume settings wheel.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
