NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNas 6.2 (NAS locks up entirely)
EDIT BY MODERATOR: Please see the post at the end of the thread: http://www.readynas.com/forum/viewtopic.php?p=456217#p456217 I guess i am not the only one this is happening to! everything worked ...
2nafish2
Firstly, if you really want the highest probability of getting your data back then just contact support, pay them and get it sorted out.
To clarify:
Your original setup was jbod with 1 volume on each disk, so you had one 3 tb volume and one 1 tb volume. If this was the case then you were not using Xraid, but flexraid. Is this correct?
During your attempts at OS reinstall you did a USB boot? Correct ?
You say you factory defaulted the nas with the 1 tb drive, correct? Did the unit work normally after this and did the GUI come up?
Then you put the 3 tb drive into slot 2, or did you replace the 1 tb disk in slot 1? Was the nas on when you did this?
You then presumably removed the 3 tb drive from the nas, correct?
Firstly, if you really want the highest probability of getting your data back then just contact support, pay them and get it sorted out.
To clarify:
Your original setup was jbod with 1 volume on each disk, so you had one 3 tb volume and one 1 tb volume. If this was the case then you were not using Xraid, but flexraid. Is this correct?
During your attempts at OS reinstall you did a USB boot? Correct ?
You say you factory defaulted the nas with the 1 tb drive, correct? Did the unit work normally after this and did the GUI come up?
Then you put the 3 tb drive into slot 2, or did you replace the 1 tb disk in slot 1? Was the nas on when you did this?
You then presumably removed the 3 tb drive from the nas, correct?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
