NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readynas duo firmware out of date but cannot log on to admin page as browser says firmware nbg
I am attempting to resurrect an Readynas duo but unfortunately after reset to factory to obtain a new ip address and radar finds OK i cannot log on to admin page because firmware is 4,1,16 which browser says is not supported - presumably because protocl TLS1.2 is not in the old firmware.
How do I solve the chicken and egg problem and get access?
19 Replies
Replies have been turned off for this discussion
mullenrhenass wrote:
i cannot log on to admin page because firmware is 4,1,16 which browser says is not supported
FWIW, 4.1.16 isn't out-of-date - it's the final firmware for your NAS. But it unfortunately only supports TLS 1.0, and recently browsers are beginning to drop support for that.
For now, you can regain access
- Connecting with Internet Explorer
- Connecting with Edge in "IE mode" https://docs.microsoft.com/en-us/answers/questions/450116/how-to-enable-ie-mode-on-microsoft-edge.html
- Downloading an older browser version, and immediately configure it to NOT autoupdate. Firefox 94.0.2 will work. https://ftp.mozilla.org/pub/firefox/releases/94.0.2/
There is a thread here that gives you another option (once you have access) - https://community.netgear.com/t5/New-ReadyNAS-Users-General/Workaround-for-ERR-SSL-VERSION-OR-CIPHER-MISMATCH-problem-for/m-p/2198243 That option is to modify virtual.conf in the NAS, so that it will allow http to be used to reach the admin page (instead of redirecting to https). There is a guide in message 5 of the thread. The downside is that the admin interface is unencrypted.
Thanks. I actually chose Opera as it has a patched version of v9 available for download.
After finding that the default password is NOT password but netgear1 ?? I get a frontview window with everything greyed out. If I try to login to ipaddress/shares I get an error message in a frontview window saying no shares accessible.
Can I get any further ? đ
mullenrhenass wrote:
After finding that the default password is NOT password but netgear1 ??
Correct. The default password for all systems running 4.x firmware is netgear1. The default for 5.x and 6.x systems is password.
mullenrhenass wrote:
try to login to ipaddress/shares I get an error message in a frontview window saying no shares accessible.
By default, shares are not shared with http. So this is not unusual.
mullenrhenass wrote:
Thanks. I actually chose Opera as it has a patched version of v9 available for download.
I get a frontview window with everything greyed out.
I've never used Opera to access frontview, and I am wondering if it is fully compatible. Is there any data on the NAS? I'm thinking likely not, since it is using the default password.
If there is data, can you access it with SMB?
What size disks are you using? The max size for 4.1.x systems is 2 TB.
It might also be useful to see what status RAIDar gives for the NAS. https://kb.netgear.com/20684/ReadyNAS-Downloads#raidar
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
