NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS NV+ Raid question
We have ReadyNAS NV+ with 2 HD in it and it is currently set to X-RAID, Status Redundant. the issue is that when the drives sync, we get data put back into the folders that we previously moved out. F...
udwo wrote:We have ReadyNAS NV+ with 2 HD in it and it is currently set to X-RAID, Status Redundant. the issue is that when the drives sync, we get data put back into the folders that we previously moved out.
What do you mean "when the drives sync"? Once initially sync'ed, RAID does not periodically re-sync. Do you have a backup process that is syncing to/from the NAS? That is likely the process that is causing this issue. If it's a backup run by the NAS itself, give details and we can likely help you.
I checked the Status > Health and it says OK. not sure how to add screen shot here, but here is the status from that page:
Disk 1 WDC WD1002FAEX-00Z3A0 931 GB , 44 C / 111 F , Write-cache ON OK
Disk 2 WDC WD1002FAEX-00Z3A0 931 GB , 44 C / 111 F , Write-cache ON OK
Fan 1 1973 RPM OK
Temp 1 36.5 C / 97 F [Normal 0-60 C / 32-140 F] OK
UPS 1 Not present OK
udwo wrote:
Disk 1 WDC WD1002FAEX-00Z3A0 931 GB , 44 C / 111 F , Write-cache ON OK
Disk 2 WDC WD1002FAEX-00Z3A0 931 GB , 44 C / 111 F , Write-cache ON OK
Fan 1 1973 RPM OK
Temp 1 36.5 C / 97 F [Normal 0-60 C / 32-140 F] OK
UPS 1 Not present OK
Once again - click on the SMART+ button next to each drive and you will see a popup that looks like the one on the right of my screen shots. It shows reallocated sectors, current pending sectors, uncorrectable errors, ATA error count, and Spin Retry Count. Those details are what I'd like to see.
udwo wrote:
not sure how to add screen shot here, but here is the status from that page:
After you've done more posts, there will be a "insert image" control in the rich text tool bar.
SMART Information for Disk 1
Model: WDC WD1002FAEX-00Z3A0
Serial: WD-WCATR5322881
Firmware: 05.01D05
SMART Attribute
Raw Read Error Rate 8
Spin Up Time 4475
Start Stop Count 48
Reallocated Sector Count 0
Seek Error Rate 0
Power On Hours 50769
Spin Retry Count 0
Calibration Retry Count 0
Power Cycle Count 48
Power-Off Retract Count 47
Load Cycle Count 0
Temperature Celsius 43
Reallocated Event Count 0
Current Pending Sector 0
Offline Uncorrectable 0
UDMA CRC Error Count 0
Multi Zone Error Rate 2
ATA Error Count 0
Extended Attribute Hot-add events 0
Hot-remove events 0
Lp stat events 70
Power glitches 0
Hard disk resets 0
Retries 0
Repaired sectors 0
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
