NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS NVX resurrection
I know this is a shot in the dark, but I have a ReadyNAS NVX that has been sitting in a box for years now, and I finally decided to see if I could reconnect it to my home network and use it. I plugge...
You can do an OS reinstall from the front panel. That will reset the admin password to netgear1, and will also reset the network configuration to use DHCP. Instructions are on pages 21-22 here: https://www.downloads.netgear.com/files/GDC/RNDU2000/ReadyNAS_Ultra_UltraPlus_NVX_Pro_HW_en_8July11.pdf
If you care about the data that might be on it, be careful not to do the factory default.
Then browse to https://nas-ip-address/admin (using the real IP address of course), and click through the security warning. Current (and final) firmware for the NVX is 4.2.31 ( https://kb.netgear.com/000038793/RAIDiator-x86-Version-4-2-31 )
Note that the only version of SMB supported by the NVX is SMB1. You can enable that in Windows 10, but I don't think it is possible on a new Mac (not sure, as I am not a Mac owner). So you would be limited to AFP or NFS (or FTP).
Also - while some 4.2.x NAS can be converted to run OS 6, the NVX cannot be. It is a 32 bit platform, and OS 6 requires 64 bits.
You can do an OS reinstall from the front panel. That will reset the admin password to netgear1, and will also reset the network configuration to use DHCP. Instructions are on pages 21-22 here: https://www.downloads.netgear.com/files/GDC/RNDU2000/ReadyNAS_Ultra_UltraPlus_NVX_Pro_HW_en_8July11.pdf
If you care about the data that might be on it, be careful not to do the factory default.
Then browse to https://nas-ip-address/admin (using the real IP address of course), and click through the security warning. Current (and final) firmware for the NVX is 4.2.31 ( https://kb.netgear.com/000038793/RAIDiator-x86-Version-4-2-31 )
Note that the only version of SMB supported by the NVX is SMB1. You can enable that in Windows 10, but I don't think it is possible on a new Mac (not sure, as I am not a Mac owner). So you would be limited to AFP or NFS (or FTP).
Also - while some 4.2.x NAS can be converted to run OS 6, the NVX cannot be. It is a 32 bit platform, and OS 6 requires 64 bits.
StephenB,
Thanks for the quick response! The directions and link to the Manual were hugely helpful and I now have full access to all of my files. Your help was hugely helpful, thanks!
Mike
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
