Forum Discussion

mdgm-ntgr

NETGEAR Employee Retired

Feb 03, 2016

Solved

ReadyNAS OS 6.4.2 Feedback Thread

Please share your feedback from running ReadyNAS OS 6.4.2

Installation & Upgrade

mdgm-ntgr
Feb 09, 2016
6.4.2 is now available on the update server.

Thanks for sharing your early feedback on 6.4.2. We are now closing this thread, but if you have encountered an issue please open a new thread to discuss it.

DoctorBrown

Apprentice

Feb 03, 2016

I do not seen an improvement of the raw transfer rate from what I reported in this thread:

Slow Network performance with ReadyNASOS 6.4.2 (RC1)

The transfer rate is still 40% slower than what I saw with 6.2.5.

StephenB

Guru - Experienced User

Feb 03, 2016

I'm also still seeing poor SMB performance on my RN102 (running released 6.4.2).

I plan to try a factory reset - the volumes are very old, and I know that the settings used for btrfs have changed along the way. I'll report back if that helps.

rjwerth
Luminary
Feb 04, 2016
I'd be interested to know if that helps. My volumes are only a year old, but they made changes soon after I was up and running. I'd hate to do a full reset, but I would if it sped things up significantly.
bolek007
Tutor
Feb 08, 2016
I'm also seeing very poor SMB performance on my RN102, 6.4.2
Downgrade to 6.4.0 solved this issue...
- StephenB
  Guru - Experienced User
  Feb 08, 2016
  bolek007 wrote:
  
  I'm also seeing very poor SMB performance on my RN102, 6.4.2
  
  Downgrade to 6.4.0 solved this issue...
  
  I was seeing reduced performance on my RN102 (but not my RN202). I did a factory reset, which resolved it. Now I am seeing 70-75 MB/s running 6.4.2.