NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Pro 6 install not allocating all available space
Two issues: Win 8.1. Six 4TB HGST Deskstar NAS HDs. Connected via Ethernet to router. I can see it fine on the network. X-RAID2 only allocates 8.1TB (RAID 0 allocates 10). 1.673 TB each drive....
I don't see the hgst desktop nas drives in any capacity on any HCL.
The 3 tb version is model HDN724030ALE640
You could either wait for the resync to complete, reboot and see what happens, or interrupt it, factory default with one drive and update the firmware (yours is quite old) then power down, put all drives in and factory default again. I'd suggest this is a better plan.
You won't be able to expand without doing another factory default because of the 16 tb volume limit. This means that a factory default is required to setup any volume that exceeds 16 tb.
The 3 tb version is model HDN724030ALE640
You could either wait for the resync to complete, reboot and see what happens, or interrupt it, factory default with one drive and update the firmware (yours is quite old) then power down, put all drives in and factory default again. I'd suggest this is a better plan.
You won't be able to expand without doing another factory default because of the 16 tb volume limit. This means that a factory default is required to setup any volume that exceeds 16 tb.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
