NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readynas Ulra 6 (RND-6B) won't boot
Hi, I have an Ultra 6 (RND-6B) which had a message on the display saying 'IP address conflict' so I powered it off and on again to see if this would resolve the problem. Unfortunately when i tur...
johnrosborough wrote:
PS I next thought was to remove all the drives and insert one new fresh drive to see if the system boots up normally.
That is worth a try. It could be that one/more of your disks is failing.
I installed the new hard disk and the Ultra 6 booted up normally and setup the default configuration. I can now access it using radair. The firmware version is RAIDiator 4.2.22.
So it looks like the Ultra 6 is good, any suggestions on what i should do next?
thanks
John
With the disks installed are you still seeing the IP address conflict error?
Do you recall if your NAS is set to use a static IP address?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
