NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Ultra 2 - Not discoverable with Raidar 6.4 via network or direct ethernet connection
Purchased a used (but in new/seemingly unused state) ReadyNAS Ultra 2 w/o drives. Installed an old drive (does the drive have to be "good"?), put in the power cords, ethernet cord to the router, ...
Sandshark wrote:
For a NAS of that generation, you should use RAIDar 4.3.8, as it has a setup provision that is not in newer versions because newer NAS don't use it.
The 4.3.8 version is needed if you want to use FlexRAID. But RAIDar 6.5 will work for everything else (including discovery).
The protocol uses ethernet broadcast packets. If the Windows PC was using wifi, you might try again with an ethernet connection. Also disable any internet security software on the PC. But it should be getting a DHCP address from your router, even if it is booted diskless.
If you haven't already tried this, you might want to try a different ethernet cable, and maybe also try connecting the NAS to a different switch/router and see if that makes a difference.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
